IDS Land Rover Jaguar V.125.03.rar |LINK|
Download File === https://tinurll.com/2tAKul
How to Install IDS Land Rover Jaguar v.125.03.rar on Windows 10
IDS Land Rover Jaguar v.125.03.rar is a dealer diagnostic software for Land Rover and Jaguar vehicles. It provides complete diagnostic coverage of current and future models, and replaces the Worldwide Diagnostic System (WDS).[^4^] [^7^]
In this article, we will show you how to install IDS Land Rover Jaguar v.125.03.rar on Windows 10 step by step. You will need a compatible diagnostic device, such as VCM I & II, Rotunda Da-Dongle, Drewtech Mongoose JLR, JLR VCI or JLR DoIP VCI.[^4^] [^5^]
Step 1: Download the software files
You will need to download the following files from a reliable source:[^2^]
SDD_ {version}.00_FULL.exe - the full installation file
VDF_L {A,V}_ {version}.exe - the Land Rover files
VDF_J {A,V}_ {version}.exe - the Jaguar files
SPA_ {version}.exe - the Pin-point tests
SDD_ {version}.**.exe - the updates
The "Pill" - the crack file
Make sure you have enough space on your hard drive (at least 80 GB) and disable any antivirus or firewall software before downloading.[^2^]
Step 2: Install the software files
After downloading the files, you need to install them in the following order:[^2^]
Run SDD_ {version}.00_FULL.exe and follow the instructions on the screen.
Run VDF_L {A,V}_ {version}.exe and follow the instructions on the screen.
Run VDF_J {A,V}_ {version}.exe and follow the instructions on the screen.
Run SPA_ {version}.exe and follow the instructions on the screen.
Run SDD_ {version}.**.exe and follow the instructions on the screen.
Copy and paste the "Pill" file into the installation folder of SDD (usually C:\\Program Files (x86)\\JLR).
If you use 64-bit Windows, you also need to run CMD.exe with administrative rights and execute this command:[^2^]
mklink /D \"C:\\Program Files\\JLR\" \"C:\\Program Files (x86)\\JLR\"
Step 3: Install the drivers for your diagnostic device
You need to install the drivers for your diagnostic device according to its manufacturer's instructions. You can find them on their official website or on a CD that came with your device.[^5^]
Step 4: Disable automatic updates and remove message
To prevent SDD from updating automatically and showing a message that updates are not installed, you need to do the following:[^2^]
Delete or rename this folder: C:\\ProgramData\\FLEXnet\\Connect\\Database
Delete or rename this file: C:\\ProgramData\\JLR\\IDS\\Log Files\\InstallationLog.txt
Step 5: Launch SDD and connect your diagnostic device
You are now ready to launch SDD and connect your diagnostic device to your PC and vehicle. You can use SDD to perform various diagnostic functions, such as reading fault codes, clearing fault codes, programming modules, testing actuators, etc.[^5^]
If you encounter any problems or errors during installation or usage, you can refer to this troubleshooting guide:[^2^] 061ffe29dd